Circa 1850 NU-LUSTRE-27 Brush-On (UV-STABLE) is a thick, high gloss epoxy finish. It can be applied onto vertical surfaces using a brush - one coat equals up to 27 coats of varnish. NU-LUSTRE-27 is UV-Stable, remaining clear when other epoxies will slowly amber. It can be applied over newspaper or magazine clippings, photographs, leather, wood, ceramic, rocks, dried flowers, shells and many other items. NU-LUSTRE-27 is the ideal coating for exterior applications, such as boats, paddles, fishing rods and signs.
The surface to be covered must be dry and free from dust, wax, grease or oil. Measure 2 parts resin to 1 part hardener in seperate containers. Empty the contents of both containers into a third container. Mix thoroughly for an additional 60 seconds and use immediately. Bubbles that rise to the surface may be broken by gently exhaling on the bubbles. Cure for 24 hours at 20-25C, humidity less than 50%.
Click here for detailed instructions and ideas.
|Product Code: 1527|
|710 mL (1½ pt)||6|
- BRUSH ON APPLICATION
- BEAUTIFUL BRILLIANT FINISH
- ONE COAT EQUALS UP TO 27 COATS OF VARNISH
- ADHERES TO VERTICAL SURFACES
- CLEAN UP: EPOXY THINNER, SUPER DEGOOPER
Our products are available at many retail locations. To find a store near you, please click on WHERE TO BUY.
No demonstration available.